Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI Sliding Glass & Patio Doors in Miami: What to Know First
We provide independent CGI sliding glass and patio door repair, replacement, and installation across Miami, and most jobs are completed within one to three business days once we’ve sourced the right parts. Pricing runs higher than generic door work because CGI doors are built to a stricter standard, but we give you a written line-item estimate before any work begins so you know exactly what you’re paying for. This page is for Miami homeowners who already own CGI products or are considering them and want straight answers about how they hold up, what breaks, and what it costs to fix them right. Call (863) 862-5435 and Ed Winslow or one of our techs will walk you through what you’re dealing with.
Key Takeaways:
- We’re an independent CGI service provider, not a factory-authorized dealer, which means we repair doors instead of pushing replacements when repair is the honest call.
- CGI sliding doors in Miami fail most often at the rollers, the interlock weatherstripping, and the bottom track, especially in condo buildings near salt water.
- Every CGI job gets a written quote, and every repair is covered by our 36500-Day Done Right Promise.
- Seniors and veterans save 10% permanently, and any repair over $200 takes $40 off, no expiration date.
How CGI Products Fail, and How We Fix Them
CGI builds a serious door. But Miami is a serious environment, and after a decade of salt air, afternoon squalls, and condo association pressure washing, certain failure patterns show up again and again. Here’s what we actually see in the field:
- Roller failure on the CGI Estate and Targa series. The original nylon rollers wear down unevenly because Miami’s fine construction dust and sand grit work into the track. The door starts dragging, then sticks, then won’t budge. We replace the rollers with stainless-steel ball-bearing units and clean the track channel, not just the surface, so the fix lasts longer than a six-month patch job.
- Interlock weatherstripping separation on CGI sliding panels. The vertical interlock where the two panels meet is the first point of failure in high-rise condos near Biscayne Bay. Salt air hardens the vinyl, it cracks, and you lose the compression seal. Water finds its way in during wind-driven rain. We replace the interlock with fresh OEM-grade weatherstripping and adjust panel alignment so the seal actually compresses again.
- Bottom track corrosion on older CGI doors in coastal condos. We see this constantly in Brickell and Edgewater buildings built in the early 2000s. The anodized track eventually surrenders to salt, pitting and pocking until the rollers chew themselves up. We clean, treat, and where the track is too far gone, replace the track section rather than the whole door, which saves thousands.
- Lock actuator and mortise lock wear on CGI sliding doors. The multipoint lock is the security backbone of these doors, and when the actuator mechanism wears out, the handle turns but the hooks don’t fully throw. We rebuild or replace the lock body, and if the door is still under CGI’s warranty window, we’ll tell you to file the claim and we’ll handle the labor side so you’re not paying for what the manufacturer should cover.
- Glass seal failure on CGI impact units. Condensation between the panes doesn’t mean the impact glass failed. The laminated interlayer is still intact. What you’re seeing is a failed edge seal on the insulated glass unit. We order the correct replacement IGU with the proper Miami-Dade NOA compliance documentation, not a generic glass pack that would compromise the door’s rating.
Our CGI Sliding Glass & Patio Doors Process
Here’s what happens when you call Winslow Windows & Doors about a CGI slider:
- 1
The call. A live person answers, 24/7, no voicemail tree. We ask which CGI model you have, what the door is doing, and when it started.
- 2
The diagnosis. A background-checked technician arrives in uniform, confirms the model line, inspects the track, rollers, interlock, lock body, and glass seals, and gives you a written diagnosis with photos on the spot.
- 3
The parts decision. We explain whether OEM CGI parts are needed, or whether a quality aftermarket component will give you the same performance at a lower cost. We never install parts that compromise the door’s impact rating.
- 4
The repair. We do the work, clean the entire track and frame, adjust panel height and alignment, and torque everything to spec.
- 5
The test. We run the door through a full cycle test, spray-test the interlock seal, and verify the multipoint lock throws cleanly.
- 6
The guarantee walk. Ed’s name is on the job. You inspect the work while we’re still there. If it’s not right, we fix it before we leave, and the 36500-Day Done Right Promise covers it after we’re gone.
What CGI Sliding Glass & Patio Doors Costs in Miami
Here’s what Miami homeowners should expect to pay for CGI sliding door work in 2026, based on what we’ve quoted across Doral, Kendall, Coral Gables, and the coastal corridor:
| Service | Typical Miami Range |
|---|---|
| Full roller replacement, both panels | $280 - $480 |
| Interlock weatherstripping replacement | $180 - $320 |
| Track cleaning and re-alignment | $150 - $275 |
| Multipoint lock rebuild or replacement | $340 - $650 |
| Complete sliding panel replacement (impact-rated) | $3,800 - $7,200 per panel |
What moves the price: condo floor number and access (upper-floor units cost more to rig), whether the door is still under warranty, and whether we’re fixing one component or several at once. You’ll get a fixed quote before we touch anything. Call (863) 862-5435 for an exact number. Estimates are free.
Why Miami Homeowners Call Winslow Windows & Doors for CGI Work
Ed Winslow grew up in Kendall, back when Dadeland Mall was still the edge of civilization and half the streets were unpaved. He learned the trade at Miami Dade College’s construction technology program and spent years installing alongside South Florida’s best crews before putting his own name on a truck. My name is on the door, literally. That’s not a slogan. It’s the reason we answer calls at 2 a.m. and show up when we say we will. If a CGI door is the right fix, we fix it. If it needs replacing, we’ll tell you straight and offer options across our authorized lineup, including PGT, CWS, ES Windows, and ECO Window Systems, so you’re never boxed into one brand. Every tech is background-checked and uniformed. The 36500-Day Done Right Promise means if it’s not done right, we make it right, a century-long standard no faceless chain can match. We’re the one down the road, not a ticket number in a call center.
FAQs
We can’t process a CGI warranty claim ourselves, but we inspect the door, document the failure, and tell you exactly what to submit to CGI, and if the claim is approved, we handle the removal and installation labor so your warranty actually means something. If the claim is denied, we’ll show you what the repair costs and let you decide. Call (863) 862-5435 for a free evaluation.
A properly maintained CGI slider in Miami should give you 20 to 25 years of service before major components like panels need replacing, but the salt-air environment shortens that if you skip track cleaning and lubrication. Condo buildings on the coast need service every 2 to 3 years. Inland homes in Kendall or Palmetto Bay can go 4 to 5 years between tune-ups.
We use OEM CGI parts whenever the failure is on a load-bearing or impact-rated component, because aftermarket parts don’t carry the same Miami-Dade NOA certifications. For wear items like rollers and weatherstripping, quality aftermarket parts often outperform the originals at a lower cost. We give you the choice on paper before we order anything. Free estimates at (863) 862-5435.
Repair is worth it if the frame is square, the glass is sound, and the track isn’t structurally compromised, which covers about 70% of the older CGI doors we see in Miami condos. Replacement makes sense when multiple panels have failed seals or the frame has been racked by settling. We’ll tell you which one we’d choose for our own house and why.
Yes, Miami’s humidity and salt air demand that you clean the bottom track monthly during the wet season, lubricate the rollers every six months with a dry silicone spray, and inspect the interlock weatherstripping annually. Neglect those basics and you’ll pay for it with stuck doors and failed seals. We’ll show you exactly what to do at the end of any service call. Call (863) 862-5435 to schedule your free estimate.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Miami and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After