Window Installation in Miami - Free In-Home Measure, Written Price

Trusted Window Installation for Miami Homeowners

Window installation in Miami isn’t a simple swap job. It’s a decision about hurricane protection, energy bills, and whether your home stays dry in August. A quality installation in this climate typically runs $600-$2,400 per window depending on impact rating, frame material, and structural work required. We’ve been installing windows across Miami since 2011, and Ed Winslow’s name is on the business, so every job carries the weight of personal ownership. If you’re dealing with fogged glass, a window that won’t close, or that nagging worry about the next storm season, call (863) 862-5435 and a live person answers, no phone tree, no call center.

Call (863) 862-5435

Key Takeaways

• Cost reality in Miami: Standard window installation runs $600-$2,400 per window; impact-rated units from PGT or CGI typically start around $1,200 installed.
• Same-week scheduling is available for most standard installations within our Miami service area.
• Every install includes the 36500-Day Done Right Promise: if it’s not done right, we make it right.
• We install eight authorized brands including PGT, CGI, CWS, and ViewLux, never any brand outside our certified lineup.
• Free estimates with upfront, line-item pricing. No trip charge inside our home county.

What Our Window Installation Service Includes

Every window we install in Miami gets the same treatment: precise measurements, proper flashing, foam insulation around the frame, and a final inspection that would pass the strictest building code in the state. We don’t subcontract the work. Our uniformed, background-checked technicians handle the entire job from tear-out to trim. Here’s what that looks like for each window type.

Single & Double Hung Windows

Single and double hung windows are the workhorse of Miami homes, with sashes that move vertically inside the frame. Double hung units let you open both top and bottom sashes, which matters when you’re trying to exhaust hot air near the ceiling. We install these with reinforced meeting rails and proper weatherstripping so they hold tight against wind-driven rain, not just casual weather.

Horizontal Roller Windows

Horizontal roller windows slide side to side and are common in older Miami ranches and mid-century builds. They’re simple, but the tracks take abuse from sand and salt air, which is why we set the rollers on adjustable carriages and check alignment before we finish. If you’re replacing original aluminum sliders, we’ll talk honestly about whether the frame opening needs resizing or just a proper retrofit.

3-Panel Sliding (3-Lite Roller) Windows

Three-panel sliding (3-lite roller) windows stretch wide across a wall and give you a view that’s hard to beat, especially if you’re looking at water or a big backyard. Installation is heavier work because you’re dealing with three moving sashes and a frame that has to stay perfectly level so all three panels glide without binding. We check the header load above wide openings and reinforce where older homes skimped on framing.

Casement Windows

Casement windows crank outward on side hinges and seal against the frame like a door, which makes them one of the tightest-closing window styles you can buy. That matters in Miami because air leakage is a bigger energy cost than most people think. We install casements with multi-point locking systems as standard so the window actually pulls itself flush when you lock it.

Awning & Hopper Windows

Awning and hopper windows hinge at the top and push outward, so you can leave them open during a light afternoon shower without water coming in. Hopper windows hinge at the bottom and are often found in bathrooms or basements where privacy matters more than a view. Both styles need proper drainage channels and weep holes drilled correctly, which is a detail that separates a ten-year window from a thirty-year window in this climate.

Picture & Fixed Windows

Picture windows don’t open, so the entire job is about the glass package and the frame seal. If you’re installing a large fixed window facing the Miami sun, we’ll talk through low-E coatings and UV-blocking glazing options so your floors and furniture don’t fade. These units are often the centerpiece of a living room, and getting the window plumb and square against a wall that’s settled over decades is where experience pays off.

Bay & Bow Windows

Bay and bow windows project outward from the wall and create a small ledge or seating area inside. Installation is more complex because you’re building a structural projection, which means the roof over the bay, the knee wall below it, and the floor framing all interact with the window. We handle the full assembly so the window, support structure, and flashing work as one system, not three separate components.

Garden Windows

Garden windows are the box-style units that stick out over a kitchen sink, giving you a mini-greenhouse for herbs or plants. They take the most abuse of any window style because they collect heat, moisture, and direct sun from three sides. We install garden windows with reinforced bottoms so the shelf actually holds the weight of your plants, and we make sure the front slope sheds water instead of pooling it.

Brands We Service for Window Installation

We’re an authorized installer for eight premium window and door brands, and that authorization matters. It means the manufacturers send their warranty claims through us and trust our installation teams to meet their spec sheets exactly.

PGT and CGI are the two names Miami homeowners ask for most, and we install hundreds of their impact-rated units every year. PGT’s WinGuard and CGI’s Sentinel lines are engineered specifically for the hurricane wind loads we see in South Florida, and we know their installation tolerances down to the recommended shim spacing. ViewLux and CWS round out our impact lineup. ViewLux builds a high-end aluminum frame that a lot of coastal clients want when they’re replacing corroded frames within a mile of salt water, and CWS offers impact and non-impact lines that hold their own in mid-range budgets. Whether you have an existing PGT window that’s failed, a CGI opening that was never flashed correctly by the original contractor, or you’re starting fresh with ViewLux, we can help.

Signs You Need Window Installation Right Now

• Condensation between the panes. When the seal between two glass panes fails, moisture gets trapped inside and you’ll see fog you can’t wipe off from either side. That window has lost its insulating gas and its thermal performance is now about as effective as a single pane of glass, and it’s a sign the unit needs replacement rather than a surface fix.
• You can feel air moving around the frame. Run your hand along the window edges on a windy day. If you feel a draft, the weatherstripping or the frame seal has failed, and your AC is literally leaking money every afternoon in a Miami summer. Replacement isn’t just about comfort, it’s about controlling a utility bill that’s already brutal in August.
• The window won’t open or close without real effort. A window that sticks, jams, or won’t stay open is telling you the frame or balance system has failed. Beyond the annoyance, a stuck window is a fire escape problem, and in a hurricane zone, a window that won’t lock tightly is a genuine safety liability.
• Visible rot, rust, or corrosion on the frame. Miami’s salt air and humidity eat aluminum and wood frames faster than anywhere else in Florida. If you see bubbling paint, powdery white oxidation, or soft wood around the sill, the structural integrity of the frame is already compromised and you’re on borrowed time before water intrusion starts damaging the wall cavity.
• Your windows predate 2002 hurricane code standards. Most homes built before the modern Florida Building Code went into effect don’t have impact-rated glazing or proper mounting. If a storm tears through, those windows are the first point of failure, and once one goes, the wind pressure inside your home can lift the roof. Replacing them isn’t upgrade spending, it’s the single most effective structural improvement you can make.

Our Window Installation Process - Step by Step

1. 1
   Free in-home assessment and measurement. We come out, look at every window you’re replacing, and measure from the exterior to get exact outside dimensions, then from inside to check drywall opening and sill depth. We also check for any existing water damage around the frame so there are no surprises when we tear out the old unit.
2. 2
   Transparent estimate with line-item pricing. You get a written quote that breaks down window cost, frame modification if needed, flashing, insulation, and labor as separate line items. We’ll tell you the total before any work starts, and that’s the number you pay, no change orders, no escalating surprises on the invoice.
3. 3
   Order confirmation and scheduling. Once you approve, we order your windows from our authorized manufacturer network and lock in an install date. Lead time depends on whether you need custom sizes or standard production units, and we’ll tell you the week it’s arriving before you commit.
4. 4
   Professional installation day. Our uniformed, background-checked crew arrives, removes the old window, repairs any damaged framing or rotted wood, and installs the new unit with proper flashing tape, sill pan, and foam insulation. We check square and plumb at multiple points, and we don’t caulk over mistakes.
5. 5
   Final inspection and walkthrough. Ed or a senior tech walks every window with you before we call the job done. We test operation, check the seal, confirm locks engage, and make sure the job site is clean. Then we register your warranty paperwork so it’s on file with the manufacturer, not lost in a folder somewhere.

How Much Does Window Installation Cost in Miami?

Window Installation Near Miami - Our Service Area

We install windows across greater Miami, from Hialeah to Miami Beach, and down through Coral Gables, Doral, Kendall, Cutler Bay, Homestead, North Miami, Aventura, Palmetto Bay, and Miami Gardens. If you’re inside Dade County, there’s a good chance we’re already working on a street near you this week. If you want to see what we’ve done recently or learn more about who we are, start at our home page or dig into the details on our Miami window installation page.

Frequently Asked Questions - Window Installation in Miami

Schedule Your Window Installation Service in Miami Today

You deserve windows that actually protect your home, cut your AC bill, and look like they belong there. Call (863) 862-5435 now and a live person will answer, talk through what you need, and schedule your free in-home estimate. Upfront pricing, no surprises on the invoice, and Ed Winslow standing behind every window we hang. The one down the road.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Miami since 2011.