Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCWS Custom & Geometric Windows in Miami: What to Know First
Custom and geometric CWS windows in Miami can be repaired or replaced without tearing out your wall openings, and in most cases we’re on site within a few days of your call. Expect real costs to land between $900 and $4,800 per opening depending on glass package, frame condition, and how unusual the shape is. Independent CWS service is what we do, and the estimate is free.
This page is for homeowners in Miami who bought homes with CWS windows already installed, who inherited them from a previous owner, or who want to match existing CWS openings with new custom shapes. If you’re looking at a fogged arched window, a bowed radius frame, or an oversized opening that three other companies already told you is “not standard,” call (863) 862-5435 and we’ll tell you straight what it takes.
How CWS Products Fail - and How We Fix Them
Every window brand has its own way of aging in South Florida. Here’s what we actually see with CWS units in Miami, and what it takes to correct it.
- Insulated glass seal failure on CWS 6500 series radius units. Curved and arched lites flex more than rectangular glass when the sun heats one side of the frame faster than the other, and after enough years, the low-E coating or edge seal gives out and the glass fogs. We replace the glazing assembly, not just the sash, because on a geometric window the glass IS the structural panel. Half-measures come back.
- Frame joint separation at the top of tall radius windows. Miami heat expands aluminum and vinyl at different rates, and on tall arched CWS openings, the top corner joints bear the most stress. We see hairline gaps open at the miter joints, letting water in during summer downpours. The fix is realigning the corners, regluing or replacing the corner keys, and reflashing before it eats the wall behind.
- Operator and hinge sag on heavy CWS casement or awning shapes. Geometric windows often weigh more than their rectangular siblings, and the hardware wears faster. On CWS units, the original pivot hardware is fine for a decade or so, but after that you’ll get a window that won’t close square. We replace with OEM or quality aftermarket hardware and reset the sash alignment so it seats tight against the weatherstripping.
- Exterior glazing bead and gasket drying out. CWS uses exterior glazing beads on several lines, and in Miami’s salt air and UV, those rubber and vinyl gaskets turn brittle. Once they shrink, wind-driven rain gets behind the glass. We pull the old bead, clean the glazing channel, and install fresh seal material rated for coastal exposure.
- Condensation in CWS single-strength geometric glass packages. Some older CWS shaped windows in Miami went in with single-pane or thin double-pane glazing. During summer, the indoor humidity condenses on the glass, and when hurricane season pressure drops arrive, the seals take another hit. If the frame and operator are still solid, we upgrade the glass pack to a thicker, impact-rated insulated unit cut to the exact radius or angle of your opening.
These are the repairs local homeowners ask about most. Not every CWS window in Miami has these problems, but when they happen, they usually follow this pattern.
Our CWS Custom & Geometric Windows Process
Here’s how a CWS repair or replacement goes when you call us:
- 1
You call (863) 862-5435. A live person answers, 24/7. We take down the address, what you’re seeing, and a photo if you have one. No call center, no voicemail loop.
- 2
We measure on site. A uniformed, background-checked technician comes to your home in Miami, confirms the opening dimensions, inspects the frame, and checks the glass, hardware, and weatherseals.
- 3
We talk parts with you. On CWS units, the choice is OEM or quality aftermarket. We’ll give you the price difference and the trade-off for each, and we’ll never push a part we wouldn’t put in our own home.
- 4
We do the work. The new glazing is cut for the exact shape, installed, sealed, and tested. If hardware is part of the job, we set it, balance it, and run the window through a full cycle.
- 5
We check the whole opening. We walk the perimeter, look for old water intrusion, and tell you what’s fine and what isn’t. If we see something outside the window itself that will shorten its life, we say so.
- 6
You get the 36500-Day Done Right Promise. If it’s not done right, we make it right. That’s Ed Winslow’s name on the work, not a ticket number.
What CWS Custom & Geometric Windows Costs in Miami
For a standard CWS replacement or repair on a geometric window in Miami, ballpark numbers look like this:
- Glass-only replacement on a fogged radius or arched CWS unit: $900 to $1,900 per panel
- Hardware repair (operator, hinge, locking mechanism reset): $250 to $650 per window
- Full frame replacement on an oversized or unusually shaped CWS opening: $2,200 to $4,800 per opening
- Impact-rated glass upgrade to existing CWS frames: add $350 to $900 per panel, depending on size and geometry
The price moves based on how large and how odd the shape is, whether the frame is salvageable, whether the job requires impact glass, and how accessible the window is. Custom radii always cost more than stock rectangles because the glass is cut per-order and the lead time is longer. We give you a written line-item estimate before any work starts. Call (863) 862-5435 and we’ll price your exact opening, free.
Why Miami Homeowners Call Winslow Windows & Doors for CWS Work
Winslow Windows & Doors has been locally owned and operated by Ed Winslow since 2011. We’re the company neighbors call when the big-box installer says “that window can’t be fixed” and hangs up. We answer our own phone around the clock, we publish our address and license number, and we back every job with the 36500-Day Done Right Promise. If it isn’t right, we return and make it right, no fine print.
We also install PGT, CGI, ES Windows, and ECO Window Systems, so when a CWS unit is too far gone or you want to match a different brand on another opening, we can speak to it from experience, not from a catalog. Miami homeowners call us because Ed’s name is on the door, literally, and the one down the road still means something here.
FAQs
We’re an independent CWS service provider, not an authorized warranty station, so we don’t process CWS warranty claims. What we do is tell you honestly whether the problem looks like a manufacturing defect or wear-and-tear, then fix it correctly regardless. If a warranty path is open to you, we’ll point you there before you spend a dollar with us. Call (863) 862-5435 and we’ll walk you through what we see.
Most custom CWS-shaped insulated glass units run 2 to 4 weeks from order to install, depending on the template and coating. Straight rectilinear replacements are faster, often under two weeks. We’ll give you a realistic lead time when we measure, and we’ll secure the opening properly with board-up or temporary glazing while you wait.
On CWS custom and geometric windows, you can usually replace only the failed glass panel and keep the existing frame and hardware, as long as the frame is sound and the operator still functions. That saves substantially compared to a full opening replacement. We’ll inspect the frame and tell you straight which path makes sense for your window. Call (863) 862-5435 for a free estimate.
We’ll quote both OEM CWS components and quality aftermarket equivalents, and explain the difference in fit, finish, and warranty. For glazing on geometric shapes, the aftermarket route is often the only practical way to get a custom radius fast. For hardware, OEM is usually worth the extra money. We never install a part we wouldn’t trust in our own home.
We measure the opening, make a template, and order glass cut to that exact radius, arch, angle, or polygon. If the frame itself is custom, we can fabricate to match. Unusual shapes are the whole point of this page. Call (863) 862-5435 and send us a photo if you can. We’ll tell you if it’s doable and what it costs.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Miami and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.