Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCustom Impact Windows in Miami, FL
Custom impact windows in Miami are impact-rated glass units built to non-standard dimensions or shapes – Geometric & Shaped Windows like arched tops, raking angles, trapezoids, and circles – while still meeting Miami-Dade’s NOA (Notice of Acceptance) and Florida Building Code wind-load requirements. They protect against hurricane-force winds and flying debris just like any impact window, but they’re fabricated to fit openings that off-the-shelf sizes simply won’t cover. If your home has an arched entryway, a steeply pitched roofline with triangular clerestories, or a great room with oversized picture windows, a standard catalog size isn’t going to work – and that’s exactly where we come in.
At Winslow Windows & Doors, we’ve been fitting custom impact windows to Miami homes since 2011. Call us at (863) 862-5435 – a live person answers around the clock – and we’ll schedule a no-obligation measurement visit, usually within a day or two. Our Custom & Geometric Windows in Miami service covers the full range of non-standard shapes and sizes, and the page below focuses specifically on impact-rated units for hurricane protection.
When You Need Custom Impact Windows
Not every Miami homeowner knows they need a custom unit until a contractor shows up with a tape measure and a confused look. Here are the situations we run into most often:
- Your openings are oversized or undersized. Homes built in Miami’s older neighborhoods – Coral Gables, Coconut Grove, Silver Bluff – often predate standardized window sizing. If your rough opening doesn’t match any catalog size within a quarter-inch, custom fabrication is the only code-compliant path.
- Your home has arched, round, or angled windows. Eyebrow arches over front doors, half-rounds above living room windows, and the triangular gable windows common in Pinecrest and Palmetto Bay two-story homes are all shapes that require custom impact glazing to remain code-compliant after a hurricane retrofit.
- You’re replacing single-pane jalousie or louvered windows. Louvered windows – still surprisingly common in 1950s and 1960s Miami homes in areas like Little Havana and Allapattah – offer almost no wind or impact resistance. Converting them to sealed, impact-rated units almost always involves a custom rough-opening modification.
- Your permit was rejected for non-compliant windows. Miami-Dade’s product approval process is among the strictest in the country. If a previous installer used windows without a valid NOA for your opening size or design pressure rating, the county will flag it. We carry product lines – including ES Windows and ECO Window Systems – that have current Miami-Dade approvals for custom configurations.
- Your homeowners association requires a specific aesthetic. Many HOAs in Brickell, Coral Gables, and South Miami have architectural review boards that mandate particular sight-line profiles, frame colors, or glass tints. Custom fabrication lets us hit those specs while still meeting hurricane code.
- You’re adding an addition or converting a garage. New construction additions in Miami routinely produce non-standard openings. Getting custom impact windows fabricated to match the new framing – rather than rebuilding the framing around a catalog window – saves time and keeps your project on budget.
Our Custom Impact Windows Process
We don’t show up with a brochure and a guess. Every custom job follows the same measured sequence, because shortcuts in a custom impact installation are how you end up with a failed inspection or a window that leaks the first time a tropical squall rolls through.
- Field measurement and design pressure analysis. Ed Winslow or one of our uniformed, background-checked technicians comes to your home and takes precise rough-opening measurements – width, height, diagonal, and any arc or angle dimensions. We also determine the design pressure zone your address falls in (Miami-Dade’s wind map divides the county into exposure categories, and homes east of U.S. 1 in places like Key Biscayne and Coconut Grove often sit in higher-pressure zones than homes in Doral or Hialeah). This step dictates which products are eligible.
- Product selection and NOA confirmation. We match your opening geometry and design pressure to approved products from our authorized lineup. For non-standard sizes, ES Windows and ECO Window Systems both carry Miami-Dade NOAs covering a wide range of custom configurations. We pull the exact NOA document for your chosen unit before anything is ordered – not after, which is how some installers end up with a permit rejection.
- Upfront written quote. You get a line-item written estimate before we order anything. The price you see is the price on the invoice. No surprises. If you already have a written estimate from another contractor, we’ll give you a free second opinion – no appointment fee, no obligation.
- Fabrication and permit filing. Custom units are built to order, typically in three to six weeks depending on the manufacturer’s current lead time (we’ll give you the current window when you call). While the units are being fabricated, we file for your Miami-Dade or City of Miami building permit. Impact window replacement in Miami requires a permit – any contractor who tells you otherwise is either mistaken or cutting a corner that will come back on you at resale.
- Installation day. Our crew arrives in uniform, on time, and with the fabricated units already verified against the shop drawings. Installation follows the manufacturer’s approved installation instructions to the letter – because deviating from those instructions voids the NOA, which voids the inspection, which voids your insurance credit. Buck and frame prep, flashing, and silicone are all done per code before the sash ever goes in.
- Final inspection and 36500-Day Done Right Promise. We schedule and attend the final building inspection. If the inspector calls anything out, we address it – that’s the job, not a separate charge. And after the permit is closed and the inspector has signed off, our 36500-Day Done Right Promise still stands: if something isn’t right, we come back and make it right. That’s not a marketing line; Ed’s name is on the business, and that’s how he runs it.
Custom Impact Windows Pricing in Miami
Custom impact windows cost more than stock units, and in Miami, they cost more than in many other Florida markets – because Miami-Dade’s product approval requirements limit the eligible product pool and add permitting complexity. That said, the investment often pays back faster here than anywhere else in the state, through insurance premium reductions and energy savings in a climate where air conditioning runs nine to ten months a year.
Below are honest ranges based on typical Miami residential projects. Every job is different, and the only way to get a firm number is a field measurement – which we provide free of charge.
| Window Type / Scenario | Typical Installed Cost (Miami Market) |
|---|---|
| Custom-size single hung or casement (non-standard rectangular) | $650 – $1,100 per window |
| Arched or half-round custom impact unit | $900 – $1,800 per unit |
| Triangular or trapezoid geometric impact unit | $950 – $2,000 per unit |
| Oversized picture window (custom width/height, fixed impact) | $1,200 – $3,500+ per unit |
| Full-home custom impact window replacement (10-20 openings) | $18,000 – $55,000+ depending on count, shapes, and product |
| Miami-Dade permit and inspection fees | $150 – $600 depending on project valuation |
What drives the price up or down
- Glass type: Laminated impact glass is standard; low-E coatings, tinted glass, or thicker laminates add cost but improve energy performance and may increase your insurance credit.
- Frame material: Aluminum frames (most common in Miami) cost less than vinyl or composite; however, in high-humidity coastal zones like Miami Beach or Coconut Grove, powder-coated aluminum’s corrosion resistance makes it the smart long-term call.
- Opening complexity: A true radius arch requires custom-bent frame extrusions. A simple over-tall rectangular opening just needs a non-catalog size cut. The former costs significantly more.
- Permit complexity: Homes in historic districts – like Coral Gables or the Miami Beach Architectural District – sometimes require additional review, which adds time and occasionally cost.
- Structural work: If the rough opening needs to be reframed or if a load-bearing header requires modification, that’s a separate cost we’ll identify during the measurement visit – not on installation day.
We offer $40 off any repair or service over $200, and a permanent 10% discount for seniors and veterans – no expiration date, no fine print. Call (863) 862-5435 for an exact quote. Estimates are free and there’s no trip charge within our home county.
FAQs – Custom Impact Windows
Do custom impact windows qualify for Miami-Dade’s insurance discount?
Yes, custom impact windows qualify for the Florida hurricane mitigation insurance discount as long as they carry a valid Miami-Dade NOA (or a Florida Product Approval number) for your specific opening size and design pressure rating. The key is documentation: your insurer will want the NOA number, the permit, and the signed inspection card. We provide all three as a standard part of every job – not something you have to chase down yourself. Call (863) 862-5435 if you want to verify a specific product’s approval status before committing.
How long does a custom impact window order take in Miami?
Fabrication for custom impact units currently runs three to six weeks from confirmed order, depending on the manufacturer and the complexity of the shape. Add one to three weeks for Miami-Dade permitting, and most projects from signed contract to final inspection run six to ten weeks total. Projects in historic districts or with structural modifications can run longer. We’ll give you a realistic timeline upfront – not an optimistic one designed to close the sale. Call us at (863) 862-5435 and we can give you current lead times on the specific products that fit your openings.
Can I replace just one or two custom windows, or do I need to do the whole house?
You can absolutely replace individual windows – there’s no code requirement to do the entire home at once. That said, if you’re replacing more than a few, it’s worth running the numbers on a full replacement, because permitting and mobilization costs are essentially fixed regardless of count, and the insurance and energy savings scale with coverage. We’ll give you an honest side-by-side when we’re at your home. Some Coral Gables and Coconut Grove homeowners we work with phase the project over two years for budget reasons, and that’s a perfectly reasonable approach.
Are custom impact windows the same as hurricane shutters?
No. Hurricane shutters are temporary or deployable barriers that cover existing windows before a storm. Custom impact windows replace the window itself with a permanently installed, impact-rated, laminated-glass unit – no deployment required, no storage needed, no visual disruption. In Miami, impact windows also satisfy the opening protection requirement in the Florida Building Code, which shutters can do as well, but impact windows do it passively and continuously. They also provide year-round energy efficiency and sound attenuation that shutters don’t. For a home with non-standard openings, Custom & Geometric Windows services are almost always the more practical long-term solution because fabricating shutters for irregular shapes presents its own complications.
Why Miami Homeowners Choose Winslow Windows & Doors for Custom Impact Work
Custom impact windows sit at the intersection of two things Miami takes seriously: hurricane protection and building code compliance. Get either one wrong on a custom opening and you’re looking at a failed inspection, a denied insurance claim, or a window that doesn’t perform when a Category 3 makes landfall. That’s not a small risk in this market.
We’re authorized installers for ES Windows, ECO Window Systems, and Mr-Glass, among others – product lines that carry current Miami-Dade NOAs across a wide range of custom shapes and sizes. We’ve been doing this since 2011. Ed Winslow built this company with his name literally on the door, which means every custom installation we do reflects directly on him. That’s a different kind of accountability than you get from a national chain that routes your call to a regional office and assigns whoever’s available.
When you call (863) 862-5435, a real person answers. When we give you a price, it’s the price. When we say we’ll be there Tuesday morning, we’re there Tuesday morning. And when the job is done, our 36500-Day Done Right Promise means it stays done right – or we come back.
If you’re still researching your options, the Winslow Windows & Doors homepage covers everything we do across windows, doors, and roofing. And if you want to understand the full range of non-standard window options – not just impact-rated units – our Custom & Geometric Windows in Miami page is the right place to start.
Key Takeaways
- Custom impact windows are fabricated to your exact opening dimensions and shape while meeting Miami-Dade NOA and Florida Building Code requirements.
- Permits are required for all impact window replacements in Miami – no exceptions, and any installer who suggests otherwise is creating a problem for you at resale.
- Installed costs in Miami typically run $650 to $3,500+ per unit depending on size, shape, and glass type; full-home projects range from roughly $18,000 to $55,000+.
- Properly documented custom impact windows qualify for Florida’s hurricane mitigation insurance discount.
- Fabrication plus permitting usually means a six-to-ten-week total timeline from signed contract to final inspection.
- Winslow Windows & Doors backs every installation with the 36500-Day Done Right Promise and offers a permanent 10% discount for seniors and veterans.
Get a Free Estimate on Custom Impact Windows in Miami
If you have a non-standard opening, an unusual shape, or you’re simply not sure what’s code-compliant for your home, the fastest way to get answers is a field measurement. Call Winslow Windows & Doors at (863) 862-5435 – any hour, any day, and a live person will pick up. Ed Winslow and our team serve Miami and the surrounding communities, and we’ll get a measurement visit scheduled quickly. Upfront pricing, no trip charge within the home county, and no pressure to sign anything on the spot. Just a straight answer about what your home needs and what it will cost.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Miami since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.